Quick start guide for Artisan with the new-version Enclosure
-The new-version Enclosure has one extra middle beam on the top panel and two extra middle columns on the side panel.
-The changes in the appearance of the new-version Enclosure are only made to optimize logistics costs. Please rest assured that the functionalities of both versions of Enclosure in offering a reliable user experience are the same.
Quick start guide for Artisan with the old-version Enclosure
Changelogs of the Quick Start Guide
Assembly tips and notes
Assembly instructions (for Artisan with the new-version Enclosure)
Installing the toolhead
General safety
Regulatory compliance
3D printing safety
Emergency measures & Precautions
Laser safety
Emergency measures & Precautions
Installing Snapmaker Luban
Connecting to Luhan via the serial port
Connecting to Luhan via Wi-Fi
Updating the firmware
Checklist before use
Warnings & Labels
Specifications
Filament library
Workflow overview
Pre-checking
Calibrating
Loading filament
Choosing the proper build plate side
Preparing the G-code file
- Dual-matieral Slicing Quick Guide
Starting printing on Luban or Touchscreen
Removing the print
Filament runout recovery
Waste disposal
Warnings & Labels
Technical specifications
Supported materials
Pre-checking
Calibrating
Configuring & generating 3-axis laser G-codes using Snapmaker Luban
Recommended parameters for 3-axis laser engraving and cutting
Starting laser engraving and cutting
Waste disposal
Quick start guide for the 3-axis 20W/40W laser machining on Artisan
Installing the air assist pump
Technical specifications
Warnings & Labels
Supported materials
Calibrating the laser platform height
Fixing laser materials on the platform
Adjusting the laser height for 3-axis machining
Setting the work origin for 3-axis machining
Configuring & generating 3-axis laser G-codes using Snapmaker Luban
Recommended parameters for 3-axis laser engraving and cutting
Starting laser engraving and cutting
Quick start guide for 4-axis laser machining
Quick start guide for 4-axis CNC machining
Assembling the Rotary Module
Installing the Rotary Module onto the machine
Installing the tailstock of the Rotary Module
Connecting the Rotary Module to the machine
Material requirements of the Rotary Module
Calibrating the central axis
Fixing materials on the Rotary Module
Configuring & generating 4-axis laser G-codes using Luban
Adjusting the laser height for 4-axis machining
Setting the work origin for 4-axis machining
Fixing materials on the Rotary Module
Configuring & generating 4-axis CNC G-codes using Luban
Changing CNC bits with the Bit Assistant
Setting the work origin with the Origin Assistant