¶ FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
¶ ISEDC Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Operation of 5150-5250 MHz is restricted to indoor use only.
The device complies with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 20 cm.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage.
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Le fonctionnement de 5150-5250 MHz est limité à une utilisation en intérieur uniquement.
Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes. La distance minimale du corps à utiliser le dispositif est de 20 cm.
¶ EC DECLARATION OF CONFORMITY
| PRODUCT INFORMATION | |
| Product | 3D Printer |
| Model | Artisan |
| Function | Snapmaker Modular 3-in-1 3D Printer with 3D Printing, Laser Engraving & Cutting, and CNC Carving functions |
| MANUFACTURER | |
|
Shenzhen Snapmaker Technologies Co., Ltd. 4F, Building 13, Pingshan First Road, Nanshan District, Shenzhen, China Post Code: 518000 (86) 0755-26926117 |
|
| YEAR OF AFFIXING CE MARKING: 2022 | |
|
We hereby declare under our sole responsibility that the product above is in compliance with the essential requirements of the Machinery Directive (2006/42/EC), EMC Directive (2014/30/EU), Radio Equipment Directive (2014/53/EU), WEEE Directive 2012/19/EU, ROHS Directive (2011/65/EU), Amendment Directives (2015/863/EU) and REACH. By application of: |
|
| STANDARDS | TITLES |
|
EN 55032:2015+A11:2020 EN 55035:2017+A11:2020 EN IEC 61000-3-2: 2019+A1:2021 EN 61000-3-3:2013+A1:2019 |
EN 55032, Electromagnetic compatibility of multimedia equipment-Emission EN 55035, Electromagnetic compatibility of multimedia equipment-Immunity EN 61000-3-2, Limits for harmonic current emissions EN 61000-3-3, Limits Section 3 (EMC) |
|
EN IEC 62311:2020 BS EN IEC 62311:2020 |
RED Article 3.1(a), Health (RED) |
|
ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) |
RED Article 3.1(b), EMC (RED) |
|
ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) |
RED Article 3.2, Radio (RED) |
|
IEC 60825-1:2014 (Edition 3.0) EN 60825-1:2014 |
IEC/EN 60825-1:2014, Safety of laser products-Part 1: Equipment classification and requirements RED Article 3.1(a), Safety (RED) |
| EN 62368-1:2020+A11:2020 | RED Article 3.1(a), Safety (RED) |
| Council Directive 2006/42/EC, Annex I | Council Directive 2006/42/EC, Annex I Essential health and safety requirements relating to the design and construction of machinery; (MD) |
| EN 60204-1:2018 | EN 60204-1:2018, Safety of machinery - Electrical equipment of machines, Part 1: General requirements (MD) |
| ISO 13849-1:2015 | ISO 13849-1:2015, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (MD) |
| EN ISO 12100:2010 | EN ISO 12100:2010, Safety of machinery - General principles for design - Risk assessment and risk reduction (MD) |
| Directive 2011/65/EU | A RoHS Directive 2011/65/EU and amendment directives (EU) 2015/863 on Lead, Cadmium, Mercury, Hexavalent Chromium, PBBs & PBDEs, Phthalates(DBP, BBP, DEHP, DIBP) content (RoHS) |
| (EC) No 1907/2006 | European Chemicals Agency (ECHA) regarding Regulation (EC) No 1907/2006 and its amendment directives concerning the REACH. (REACH) |
The technical documentation is kept at the Manufacturer’s address.
Shenzhen Snapmaker Technologies Co., Ltd.
CHEN XUEDONG / CEO
Date of issue: 11/30/2022
Place of issue: SHENZHEN, CHINA
