- Assemble the Enclosure as instructed, especially correctly inserting the LED strip cords into the Enclosure converter.
- Connect the Enclosure to the machine by inserting the Enclosure cable to the correct port.
2.0ArtisanRay
- Tap Settings > Enclosure.
- Tap the LED Strips button to turn it on or off. When the button turns blue, the LED strips are on. When grey, off.

- Connect the machine to Luban.
- In the Enclosure panel of the Workspace, toggle the switch to turn on or off the LED strips.

Before a job
- Tap Control > Enclosure.
- Tap the LED Strips button to turn it on or off. When the button turns blue, the LED strips are on. When grey, off.
During a job
- Tap the Gear icon on the job screen.
- Tap the LED Strips button to turn it on or off. When the button turns blue, the LED strips are on. When grey, off.

- Connect the machine to Luban.
- In the Enclosure panel of the Workspace, toggle the switch to turn on or off the LED strips.

- Connect the machine to Luban.
- In Luban's Workspace, click Control in the top menu bar.

- Toggle the switch to turn on or off the LED strips in the Enclosure panel.
