Users of the CNC Module should be at least 18 years old and have relevant experience.
Use the CNC Module together with the Enclosure.
All the users and bystanders must wear the CNC safety goggles during operation.
Before a CNC process, make sure to securely clamp the material.
During a CNC process, never attempt to hold the workpiece with your hands.
If the bit or workpiece becomes jammed or bogged down, turn off the machine immediately. Wait for all the moving parts to stop, unplug the cable, and then work to free the jammed material.
Do not touch the bit or the collet right after use, as doing so could cause burn injuries.
The toxic substances contained in some materials might be released in CNC carving and cutting processes. To reduce the harm, use the CNC Module with air purifying devices or in a well-ventilated environment and take safety precautions, such as wearing a mask.