There are two ways for you to transfer the G-code file to Artisan:
- If the G-code file is generated using Luban, you can transfer it either through Luban or by using a USB flash drive.
- If the G-code file is generated using other third-party software, you can transfer it only using a USB flash drive.
Via LubanVia USB Flash Drive
- Connect the machine to Luban.
- Generate the G-code file using Luban and click Export > Load G-code to Workspace.
- In Luban's Workspace, click Send to Device in the G-code Files panel. Once the transfer is successful, Luban will display a notification.
Related Reading
- Insert a USB flash drive into your computer.
- IF the G-code file is generated using Luban, click Export > Export G-code to File to export the G-code file to the USB flash drive.
- Insert the USB flash drive into the Integrated Controller.
- On the Touchscreen, tap Start > Files > USB to find the file.