The shipping package is made of corrugated fiberboard, standing great pressure and providing effective protection for your laser engraving and cutting machine. The package can be recycled or reused to store finished works or create DIY projects. Inside the package is Expanded Polystyrene (EPS) foam, protecting your laser engraving and cutting machine from collision during shipping. Littering non-degradable EPS foam is detrimental to the environment, so toss the EPS foam into the designated trash bin.
The gases and fumes produced during laser engraving and cutting should be treated and then exhausted to the outdoors in accordance with the local laws of gas exhaustion. An air purifier will be a good option for waste gas treatment.
Do not litter non-degradable materials or engraving and cutting failures in nature. Toss them into designated trash bins.
Electronics can be discarded, donated, or recycled. Should the e-waste be no longer wanted or nearing the end of its useful life, you can choose to toss it into the designated trash bin, or take it to a trusted charity or recycler.