Technical specifications of the 10W / 20W / 40W Laser Module

	40W Laser Module	20W Laser Module	10W Laser Module
Laser Output Power	40W	20W	10W
Laser Electric Power	140W	65W	36W
Laser Type	450-460 nm Semi-conductor	450-460 nm Semi-conductor	450-460 nm Semi-conductor
Dimensions	105 mm × 166 mm × 75 mm	92 mm × 141 mm × 65 mm	114 mm × 102 mm × 60 mm
Work Area	400 mm × 400 mm (Artisan) 320 mm × 350 mm (2.0 A/AT/F350) 230 mm × 250 mm (2.0 A/AT/F250)	400 mm × 400 mm (Artisan) 320 mm × 350 mm (2.0 A/AT/F350) 230 mm × 250 mm (2.0 A/AT/F250)	400 mm × 400 mm (Artisan) 320 mm × 350 mm (2.0 A/AT/F350) 230 mm × 250 mm (2.0 A/AT/F250)
Weight	1.26 kg	0.81 kg	0.63 kg
Maximum Engraving Speed¹	100 mm/s (2.0) 200 mm/s (Artisan) 500 mm/s (Ray)	100 mm/s (2.0) 200 mm/s (Artisan) 500 mm/s (Ray)	100 mm/s (2.0) 200 mm/s (Artisan) 500 mm/s (Ray)
Maximum Cutting Speed¹	20 mm/s	10 mm/s	5 mm/s
Frame Material	Aluminum Alloy	Aluminum Alloy	Aluminum Alloy
Maximum Thickness of one-pass Cutting	15 mm Basswood Plywood	10 mm Basswood Plywood	5 mm Basswood Plywood
Supported Design File	.stl, .svg, .jaeg, .png, .jpg, .bmp, .dxf, .snaplzr	.stl, .svg, .jaeg, .png, .jpg, .bmp, .dxf, .snaplzr	.stl, .svg, .jaeg, .png, .jpg, .bmp, .dxf, .snaplzr
Supported Processing File	.nc	.nc	.nc
Laser Spot Dimensions	0.1 mm × 0.15 mm	0.08 mm × 0.1 mm	0.05 mm × 0.2 mm
Air Assist	√	√	×
Camera Capture	×	×	√
Focus Method	Auto-focus through Input Material Thickness or using the focus lever	Auto-focus through Input Material Thickness or using the focus lever	Auto-focus through Automatic Thickness Measurement, Input Material Thickness, or using the calibration target
Overheat Protection	√	√	√
Orientation Detection	√	√	√
Compatibility	2.0, Artisan, Ray, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button	2.0, Artisan, Ray, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button	2.0, Artisan, Ray, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button