The data provided on this page are for reference only. The actual printing performance of the filament varies with the printing conditions. Before printing, please check the compatibility and usability of each filament under certain circumstances.
For the supported filament of your machine/module, see here.
- Printing Temperature: 190-220˚C
- Heated Bed Temperature: 50-65˚C
- Printing Speed: 10-200 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 20-50 mm/s
- Part-cooling Fan: ON
- Standby Temperature: 150˚C
- Drying Temperature & Duration: 55˚C for 6h
- Printed with: PLA, Breakaway PLA, PVA
- Build Plate: PEI-coated side or glass side
- Printing Temperature: 220-230˚C
- Heated Bed Temperature: 25-65˚C
- Printing Speed: 20-40 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 20-50 mm/s
- Part-cooling Fan: ON
- Standby Temperature: 120˚C
- Drying Temperature & Duration: 55˚C for 6h
- Printed with: PLA, TPU
- Build Plate: PEI-coated side
- Printing Temperature: 245-265˚C
- Heated Bed Temperature: 90-100˚C
- Printing Speed: 30-50 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 20-50 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 160˚C
- Drying Temperature & Duration: 80˚C for 8h
- Printed with: ABS
- Build Plate: PEI-coated side or glass side with glue
ABS during printing can generate fumes and granules harmful to human's respiratory system. We suggest printing with ABS in a well-ventilated environment or with air-purifying devices.
- Printing Temperature: 240-260˚C
- Heated Bed Temperature: 75-95˚C
- Printing Speed: 30-50 mm/s
- Retraction Distance: 1-3 mm
- Retraction Speed: 20-40 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 160˚C
- Ambient Temperature During Printing: 50-70˚C
- Drying Temperature & Duration: 80˚C for 8h
- Printed with: ASA
- Build Plate: PEI-coated side
- Printing Temperature: 230-250˚C
- Heated Bed Temperature: 60-80˚C
- Printing Speed: 40-80 mm/s
- Retraction Distance: 0.5-3 mm
- Retraction Speed: 30-70 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 150˚C
- Drying Temperature & Duration: 60˚C for 3h
- Printed with: ABS, PETG
- Build Plate: PEI-coated side
- Printing Temperature: 230-240˚C
- Heated Bed Temperature: 70-80˚C
- Printing Speed: 30-50 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 20-50 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 140˚C
- Drying Temperature & Duration: 65˚C for 6h
- Printed with: PVA, PETG
- Build Plate: PEI-coated side
- Printing Temperature: 215-225˚C
- Heated Bed Temperature: 25-60˚C
- Printing Speed: 30-40 mm/s
- Retraction Distance: 0-1 mm
- Retraction Speed: 10-30 mm/s
- Part-cooling Fan: ON
- Standby Temperature: 100˚C
- Drying Temperature & Duration: 80˚C for 12h
- Storage Temperature & Humidity: indoor temperature, < 25% (relative)
- Printed with: PLA, PETG, TPU (TPU90, TPU95, TPU-HF, TPU-Foam), PA (CoPA, PA6-CF, PA12-CF, PA6-GF)
- Build Plate: PEI-coated side
PVA is water-soluable and thus a perfect choice to print support structures.
PVA absorbs moisture from the air easily and should be used with a filament dryer during printing and stored in a dry environment.
- Printing Temperature: 210-230˚C
- Heated Bed Temperature: 25-60˚C
- Printing Speed: 30-60 mm/s
- Retraction Distance: 0 mm
- Retraction Speed: 15 mm/s
- Part-cooling Fan: ON
- Standby Temperature: 120˚C
- Drying Temperature & Duration: 70˚C for 8h
- Storage Temperature & Humidity: indoor temperature, < 25% (relative)
- Ambient Temperature During Printing: indoor temperature,
- Printed with: Breakaway PLA, TPU (TPU90, TPU95, TPU-HF, TPU-Foam), PVA
- Build Plate: glass side
TPU absorbs moisture from the air easily and should be stored in a dry environment.
- Printing Temperature: 210-230˚C
- Heated Bed Temperature: 25-60˚C
- Printing Speed: 20-40 mm/s
- Retraction Distance: 0 mm
- Retraction Speed: 15 mm/s
- Part-cooling Fan: ON
- Standby Temperature: 120˚C
- Drying Temperature & Duration: 65˚C for 8h
- Storage Temperature & Humidity: indoor temperature, < 25% (relative)
- Printed with: Breakaway PLA, TPU (TPU90, TPU95, TPU-HF, TPU-Foam), PVA
- Build Plate: glass side
TPU absorbs moisture from the air easily and should be stored in a dry environment.
- Printing Temperature: 200-220˚C
- Heated Bed Temperature: 25-50˚C
- Printing Speed: 40-100 mm/s
- Retraction Distance: 0 mm
- Retraction Speed: 15 mm/s
- Part-cooling Fan: ON
- Standby Temperature: 120˚C
- Drying Temperature & Duration: 70˚C for 8h
- Storage Temperature & Humidity: indoor temperature, < 25% (relative)
- Printed with: Breakaway PLA, TPU (TPU90, TPU95, TPU-HF, TPU-Foam), PVA
- Build Plate: glass side
TPU absorbs moisture from the air easily and should be stored in a dry environment.
- Printing Temperature: 210-230˚C
- Heated Bed Temperature: 25-60˚C
- Printing Speed: 30-60˚C
- Retraction Distance: 0 mm
- Retraction Speed: 15 mm/s
- Part-cooling Fan: ON
- Standby Temperature:
- Drying Temperature & Duration: 70˚C for 8h
- Storage Temperature & Humidity: indoor temperature, < 25% (relative)
- Ambient Temperature During Printing: indoor temperature,
- Printed with: Breakaway PLA, TPU (TPU90, TPU95, TPU-HF, TPU-Foam), PVA
- Build Plate: glass side
TPU absorbs moisture from the air easily and should be stored in a dry environment.
- Printing Temperature: 250-270˚C
- Heated Bed Temperature: 25-50˚C
- Printing Speed: 30-60 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 40-60 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 180˚C
- Drying Temperature & Duration: 100˚C for 8h
- Ambient Temperature During Printing: 40-60˚C
- Printed with: PVA, CoPA, PA6-CF, PA12-CF, PA6-GF
- Build Plate: PEI-coated side
CoPA absorbs moisture from the air easily and should be used with a filament dryer during printing and stored in a dry environment.
- Printing Temperature: 280-300˚C
- Heated Bed Temperature: 25-50˚C
- Printing Speed: 60 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 40-60 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 180˚C
- Drying Temperature & Duration: 100˚C for 8h
- Ambient Temperature During Printing: 25-50˚C
- Printed with: PVA, CoPA, PA6-CF, PA12-CF, PA6-GF
- Build Plate: PEI-coated side
PA6-CF absorbs moisture from the air easily and should be used with a filament dryer during printing and stored in a dry environment.
- Printing Temperature: 260-300˚C
- Heated Bed Temperature: 25-50˚C
- Printing Speed: 30-60 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 40 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 180˚C
- Drying Temperature & Duration: 100˚C for 8h
- Printed with: PVA, CoPA, PA6-CF, PA12-CF, PA6-GF
- Build Plate: PEI-coated side
PA12-CF absorbs moisture from the air easily and should be stored in a dry environment.
- Printing Temperature: 280-300˚C
- Heated Bed Temperature: 25-50˚C
- Printing Speed: 60 mm/s
- Retraction Distance: 0-2 mm
- Retraction Speed: 40-60 mm/s
- Part-cooling Fan: OFF
- Standby Temperature: 180˚C
- Drying Temperature & Duration: 100˚C for 8h
- Ambient Temperature During Printing: 40-60˚C
- Printed with: PVA, CoPA, PA6-CF, PA12-CF, PA6-GF
- Build Plate: PEI-coated side
PA6-GF absorbs moisture from the air easily and should be used with a filament dryer during printing and stored in a dry environment.