If you wish to achieve optimal engraving or cutting results with other untested materials, you can utilize the Material Test feature to conduct your own tests.
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 1.5 mm | On the path | 6000 | 600 | 1 | 100% | / |
| Cutting 3 mm | On the path | 6000 | 300 | 1 | 100% | / |
| Cutting 5 mm | On the path | 6000 | 180 | 3 | 100% | / |
| Cutting 8 mm | On the path | 6000 | 600 | 10 | 100% | Initial Cutting Height Offset: -1.5 |
| Dot-filled Engraving | Fill | 3000 | / | / | 55% | Dwell time: 5 ms/dot |
| Line-filled Engraving | Fill | 6000 | 800 | / | 30% | / |
| Vector Engraving | On the Path | 6000 | 1200 | 1 | 50% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 3.175 mm | On the path | 3000 | 180 | 1 | 90% | Constant Power Mode: ON |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Line-filled Engraving | Fill | 10800 | 10800 | / | 60% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 4 mm | On the Path | 6000 | 300 | 1 | 100% | / |
| Cutting 8 mm | On the Path | 6000 | 400 | 2 | 100% | / |
| Dot-filled Engraving | Fill | 3000 | / | / | 45% | Dwell time: 5 ms/dot |
| Line-filled Engraving | Fill | 6000 | 800 | / | 45% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 3 mm | On the Path | 3000 | 180 | 1 | 100% | Constant Power Mode: ON |
| Line-filled Engraving | Fill | 3000 | 6000 | / | 60% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 2 mm | On the Path | 6000 | 600 | 1 | 100% | / |
| Cutting 3 mm | On the Path | 6000 | 240 | 1 | 100% | / |
| Dot-filled Engraving | Fill | 6000 | / | / | 45% | Dwell time: 5 ms/dot |
| Line-filled Engraving | Fill | 6000 | 800 | / | 25% | / |
| Vector Engraving | On the Path | 6000 | 2000 | 1 | 50% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Line-filled Engraving | Fill | 9000 | 9000 | / | 60% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 2 mm | On the path | 6000 | 180 | 1 | 100% | / |
| Cutting 3 mm | On the path | 6000 | 120 | 1 | 100% | / |
| Cutting 5 mm | On the path | 6000 | 100 | 2 | 100% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Line-filled Engraving | Fill | 6000 | 3500 | / | 100% | / |
| Vector Engraving | On the Path | 6000 | 3500 | 1 | 100% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Line-filled Engraving | Fill | 10800 | 10800 | / | 60% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Line-filled Engraving | Fill | 4800 | 3600 | / | 80% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 200g | On the Path | 6000 | 1800 | 1 | 90% | / |
| Cutting 300g | On the Path | 6000 | 1500 | 1 | 100% | / |
| Cutting 350g | On the Path | 6000 | 1200 | 1 | 100% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 200g | On the Path | 6000 | 1800 | 1 | 100% | / |
| Cutting 300g | On the Path | 6000 | 1800 | 1 | 100% | / |
| Cutting 350g | On the Path | 6000 | 1500 | 1 | 100% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 1.6 mm | On the Path | 6000 | 960 | 1 | 100% | / |
| Cutting 3 mm | On the Path | 6000 | 600 | 1 | 100% | / |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 2 mm | On the Path | 6000 | 500 | 1 | 100% | / |
| Dot-filled Engraving | Fill | 3000 | / | / | 30% | Dwell time: 5 ms/dot |
| Line-filled Engraving | Fill | 6000 | 3000 | / | 20% | / |
| Vector Engraving | On the Path | 6000 | 3000 | 2 | 50% | Z Step per Pass: 1 |
| Method | Jog Speed (mm/min) | Work Speed (mm/min) | Number of Passes | Laser Power | Other settings | |
|---|---|---|---|---|---|---|
| Cutting 1.5 mm | On the Path | 6000 | 600 | 1 | 80% | / |
| Cutting 2 mm | On the Path | 6000 | 500 | 1 | 100% | / |
| Dot-filled Engraving | Fill | 6000 | / | / | 30% | Dwell time: 5 ms/dot |
| Line-filled Engraving | Fill | 3600 | 3600 | / | 40% | / |