¶ Before You Start
- Assemble the Rotary Module.
- Install the CNC carving and cutting platform.
- Make sure you have the following parts and accessories:
- H2.5 screwdriver × 1
- M4 × 14 hex socket head screws
- 10 pcs for the A250-version Rotary Module
- 12 pcs for the A350-version Rotary Module
- Turn off the machine.
¶ Procedures
Attach the base of the Rotary Module to the middle of the CNC carving platform.
(The following illustration takes the A250-version Rotary Module for example)
Ensure the base is aligned with the CNC carving and cutting platform.
Related Pages
¶ Before You Start
- Assemble the Rotary Module.
- Install the CNC carving and cutting platform.
- Make sure you have the following parts and accessories:
- H2.5 screwdriver × 1
- M4 × 14 hex socket head screws
- 10 pcs for the A250-version Rotary Module
- 12 pcs for the A350-version Rotary Module
- Turn off the machine.
¶ Procedures
Attach the base of the Rotary Module to the middle of the CNC carving and cutting platform.
| A250-version | A350-version |
|---|---|
 |
 |
Related Pages
- Remove the laser engraving and cutting platform.
- Put the Rotary Module between the two Y axes.
You can adjust the final appropriate position of the Rotary Module by running the boundary when setting the XY work origin.