Quick Start Guide for Snapmaker Ray Models
Must-read for first-time use.
Turning on the machine
Updating the firmware
Installing Snapmaker Luban
Updating Snapmaker Luban
Connecting the machine to Snapmaker Luban via the serial port
Connecting the machine to Snapmaker Luban via Wi-Fi
Laser safety
Warnings & Labels
Technical specifications
Supported materials
Recommended parameters
Configuring & generating 3-axis laser G-codes using Snapmaker Luban
Recommended parameters for Snapmaker 20W and 40W Laser Modules
Adjusting the laser height
Setting the work origin
Laser safety
Warnings & Labels
Technical specifications
Supported materials
Installing the 10W Laser Module on Ray
Configuring & generating 3-axis laser G-codes using Snapmaker Luban
Adjusting the laser height
Setting the work origin
Laser safety
Warnings & Labels
Precautions & Emergency measures
Quick Start Guide for Snapmaker Ray 2W Infrared Laser Module
Laser safety
Warnings & Labels
Configuring & generating 3-axis laser G-codes using Snapmaker Luban
Adjusting the laser height
Setting the work origin
Warnings & Labels
Enclosure safety
Turning on/off the LED strips
Turning on/off the exhaust fan
Door detection
Quick start guide for the Rotary Module on Ray
Assembling the Rotary Module
Installing the tailstock of the Rotary Module
Installing the Rotary Module on Ray
Connecting the Rotary Module to Ray
Material requirements of the Rotary Module
Fixing materials on the Rotary Module
Configuring & generating 4-axis laser G-codes using Snapmaker Luban
Adjusting the laser
Setting the work origin
Adjusting the work speed of the Air Purifier
Checking the remaining lifespan of the filter cartridge