¶ Before You Start
Make sure all the cables have been inserted into the corresponding socket of the integrated controller.
¶ Procedures
- Insert the AC power cable into the power socket and the integrated controller, then switch on the power.
Once the machine is powered on, do not plug or unplug any cables unless otherwise instructed.
- Align the tooth of the safety key with the slot of the safety lock, then insert the key and turn it 90° clockwise.
After you unlock with the safety key, if the indicator light of the work switch is flashing in red, you need to press and hold the work switch to unlock the machine.
After the machine is correctly unlocked and powered on, the laser module will emit a safe red crosshair.