| Yellow |
Steady |
Standby |
/ |
/ |
|
| Green |
Steady |
Task paused |
/ |
/ |
|
| Flashing |
Performing a task |
/ |
/ |
|
| Red |
Flashing |
Blocking error |
- Limit switch triggered
- Laser module not installed correctly
- Locked with the safety key
- Laser overheat Protection triggered
- Enclosure problem
- Enclosure not connected while ticked as installed in Luban
- Enclosure door open while the machine is operating
|
Troubleshoot the error. |
|
- Heat-dissipation fan malfunctioning
- Flame detection triggered
- Toolhead not connected
|
- Shut down the machine.
- Troubleshoot the error.
- Restart the machine.
|
| Yellow & Red |
Alternating flashing |
Non-blocking error |
- microSD card not connected
- microSD card unable to be read
|
Troubleshoot the error. |
|
| Blue |
Steady |
Updating |
/ |
/ |
|
| White |
Steady |
Starting up |
/ |
/ |
|