On configuration bar, you can adjust print profile and print settings for both left and right extruders.
¶ Print Profile
Luban provides four default print profiles: Normal Print, Fast Print, Smooth Print, Precise & Strong.
-
Fast Print
Prints in a fast mode. The printing time is short, but the outcome might be rough. -
Normal Print
Prints with general settings. The printing outcome has a standard quality. -
Smooth Print
Prints the surface of the model more meticulously. It takes longer time but produces higher-quality surface for the print. -
Precise & Strong
Enhances dimensional accuracy and overall strength of the model. It takes longer time, but produces robust prints with precise dimensions. This mode is suitable for printing precision machined parts.
You can also add more customized print profiles into Luban, refer to -Add print profiles.
For J1/J1s, Luban only supports three print profiles: Normal Print(PLA/ABS/PETG), Fast Print and Smooth Surface.
¶ Print Parameter Settings
On parameter display panel, you can choose to display Luban-recommended parameters or customize by yourself.
By default, Parameter Display is in the Recommended mode.
To adjsut the parameter settings, please refer to -Adjust print settings in Luban.
To read more about what each print parameter means and what effect they can make, please refer to -Parameters in Print Settings Explained.