You can transfer the G-code file to Touchscreen or keep it on Luban for printing.
¶ Start Printing on the Touchscreen via Wi-Fi
-
In Workspace, click Send to Device via Wi-Fi.
-
On the Touchscreen, tap Got It to receive the G-code file.
- On the Touchscreen, find the G-code file by tapping Files > Local. Preview the file, check the printing settings, and tap Start to start printing.
During printing, you can readjust settings by swiping left on the printing screen.
¶ Start Printing on the Touchscreen via USB Flash Drive
-
In the 3D Printing G-code Generator, click Export G-code to File (in .gcode format) and save it to the USB flash drive.
-
Insert the USB flash drive into the Controller of the 3D printer.
- On the Touchscreen, find the G-code file by tapping Files > USB. Preview the file, check the printing settings, and tap Start to start printing.
During printing, you can readjust settings by swiping left on the printing screen.
¶ Start Printing on Luban via Workspace
-
In the 3D Printing G-code Generator, load the generated G-code file to Workspace by clicking Load G-code to Workspace.
-
After connection, click the Run button in Workspace to start printing.
Should Wi-Fi be disconnected during printing, the Touchscreen will prompt you to keep or stop printing. To keep printing, ignore the prompt; to stop printing, tap Confirm.
¶ Start Printing on Luban via USB Cable
-
In the 3D Printing G-code Generator, load the generated G-code file to Workspace by clicking Load G-code to Workspace.
-
After connection, Luban will prompt you to select your machine model and toolhead. Select and click Choose to save the settings.
-
Now you can start printing by clicking the Run button.
Keep the cable connected until the printing job is completed. Otherwise, the job will be stopped.