¶ Procedures
- On the Touchscreen, tap Control > Extruder, slide to set the target temperature for the left or right extruder, and then tap Heat.
The nozzle will be heated to 200°C (392°F) by default.
You can tap Load and Unload buttons only when the nozzle temperature has reached around 200°C (392°F).
Each type of filament requires a different heating temperature. It is recommended to consult the information provided by the filament manufacturer for more detailed instructions.
- When the extruder reaches the target temperature, tap Unload. Wait for about 20 seconds, and then tap Stop Unloading.
- Pull the filament out of the filament entry.
