Firmware V0.9.4 and above requires Snapmaker Orca V2.1.5 (or above) or Snapmaker App V2.1.5 (or above).
- Introduced filament entanglement detection sensitivity adjustment.
- Introduced toolhead attach and detach coordinate adjustment.
- Optimized UI responsiveness.
- Improved cloud server connection success rate under weak network conditions.
- Show connection failure notifications.
- Increased USB drive file scanning speed.
- Extended purge length during auto-loading to prevent filament color mixing.
- Show cloud connection status on the account page.
- Added a cloud connection error icon on the home screen.
- Fans off before vibration compensation calibration to ensure accuracy.
- Minimum temperature of the active toolhead is set to 170 °C during printing.
- Added a 15-minute screen timeout option and set it as the default.
- Enabled controlling of the auxiliary fan via the touchscreen during bed leveling.
- Fixed cloud server connection failure caused by configuration file loading errors.
- Fixed potential Klipper shutdowns when executing abnormal movement commands.
- Fixed print time reset during toolhead changes in multi-color printing.