Quick Start Guide for 3D Printing
Quick Start Guide for Laser Engraving and Cutting
Quick Start Guide for CNC Carving
How to Use the 3D Printing Function
How to Use the Laser Function
How to Use the CNC Function
How to 3D Print Multiple Models
How to Laser Engrave Multiple Models
How to Laser Engrave in Line Mode
How to Fix First Layer Adhesion Issue
How to Replace the Hot End
How to Remove a Filament Blob
How to Level the Bed
How to Remove Broken Filament
1. Read This First - Safety Information
2. Set Up for First Use
3. 3D Printing Workflow
4. Level Heated Bed
5. Load Filament
6. Prepare Files
1. Read This First - Safety Information
2. Set Up for First Use
3. Laser Engraving Workflow
4. Prepare Files
5. Generate G-code
6. Fix Material
1. Read This First - Safety Information
2. Set Up for First Use
3. CNC Carving Workflow
4. Prepare Files
5. Generate G-code
6. Fix Material
What is the layer resolution of the 3D printer?
Can it 3D print nylon filament?
What is the maximum temperature the Snapmaker Original heated bed can reach to?
What type of filaments does the Snapmaker support?
Where can I find 3D model files for free?
What kind of materials does the laser engraving support?
What is the Snapmaker Original work area of laser engraving?
What is the power of Snapmaker Original laser?
What is the wavelength of the Snapmaker Original laser?
What is the safety class of the 200mW laser?
What is the dot size of the laser?
Does it require a ventilation system to vent the fume during the laser engraving?
What kind of materials does the CNC carving support?
Where can I find out information about the settings you are using to carve jade and PCB?
What is the work area of Snapmaker Original CNC carving?
What is the shank diameter of CNC bits?
Where can I purchase replacement modules?
Can we use 3rd party slicing software?
What should I do if the filament is broken in the 3D Printing Module?
What should I do after finishing printing, the Z-axis goes to the half way?
What should I do when the printing module is installed on the Snapmaker Original while the touchscreen shows Laser or CNC module?
What should I do if the filament does not move in smoothly?
What should I do if the heated bed heats up uncontrollably?
What should I do if the 3D printing module cannot work with an enclosure?
What should I do if the layers of a 3D printing models shift to the side?
What should I do if there is a crack in the print with Snapmaker Original?
What should I do if the Snapmaker Original 3D printing module move outside the working area?
What should I do if I want to change the nozzle?
What should I do if the temperature on the screen suddenly falls to zero?
What should I do when the nozzle is jammed?
What should I do if the heated bed cannot be heated up?
What should I do if the filament doesn’t come out of the nozzle?
What should I do if the first layer does not stick to the heated bed?
How to replace the heating tube and thermistor?
What should I do if the spindle swings left and right when it is working?
What should I do if the Snapmaker Original laser is weak or there is no light at all when it is on?
What should I do if the laser cannot burn the material though I can see the laser beam?
What should I do if there is no laser coming out from the laser engraving module at my first try?
What should I do if the Snapmaker Original laser engraving module cannot work anymore?
What should I do if the touchscreen shows “Min Temp Err”(Nozzle)?
What should I do if the touch screen shows “Min Temp Err”?
What Should I do if the temperature of the heated bed/nozzle is NA on the touch screen?
What should I do if the Z-axis does not move downwards (I am not using an enclosure)?
What should I do if the Snapmaker Original printer can't be turned on/off?
What should I do if the nozzle heats up constantly or the laser and the CNC module are at full power uncontrollably?
What should I do if the toolhead cannot move down?