¶ Parts List
¶ Procedures
- Place the printer horizontally.
In order to facilitate filament replacement, it is recommended to leave a space of more than 30 cm around the machine.
- Install filament holders.
- Install doors.
To install screws with the provided hex key:
1.Screw the screw into the hole with the long handle;
2.Tighten the screw with the short handle.
- Install side panels.
5. Install the PEI glass plate.
PEI glass platforms are fragile and should be handled with care.
- Connect the power cable.
Before connecting the power cord, make sure that the power switch is off, otherwise the printer may be damaged.