¶ Introduction
This guide provides detailed instructions for replacing the heated bed cable on the Artisan 3D printer. The heated bed is a critical component for maintaining stable temperatures during the printing process, and a faulty cable may result in heating issues. The following steps outline the procedure for safely and effectively replacing the heated bed cable.
¶ Tools Needed
- New heated bed cable
- Soldering iron
- Safety goggles
¶ Safety Precautions
- Ensure the Artisan is powered off and unplugged before beginning any work.
- Wait for the heated bed to cool down completely before handling it.
- Take care when working with electrical components to avoid injury or damage to the Artisan.
¶ Step-by-Step Instructions
¶ Step 1
Refer to the pin configuration of the 7P heated bed cable shown in the image below to proceed with the subsequent soldering.
¶ Step 2
Refer to the steps in the video to remove the old heated bed cable and solder the new heated bed cable in place:
¶ Contact Support
If you encounter difficulties during the installation process and wish to seek assistance, kindly submit a support ticket through https://snapmaker.formcrafts.com/support-ticket to contact Snapmaker Support.
Our dedicated support team will be more than willing to assist you in resolving the issue.