There are two modes to adjust the laser height for the 3-axis 2W laser machining on Artisan. You can select between them by tapping the top-right corner during the laser job preparation.
The selection you make will be saved for future tasks.
This mode adjusts the laser height with the help of the focus lever.
As the focal length of the 2W Laser Module is fixed, when the focus lever touches the material, and the line above the knob aligns with Scale Focus, the laser beam will focus right on the surface of the material.
¶ Procedures
- On the touchscreen, select the G-code file in the file list and tap Next to enter the laser job preparation.
- Tap the top-right corner to select the Focus Lever - Assisted Mode.
- Follow the on-screen instructions to adjust the laser height.
The Focus Lever - Assisted Mode is set as default.
If you have calibrated the platform height and know the thickness of the material, you can use this mode to adjust the laser height.
As the focal length of the 20W/40W Laser Module is fixed, the machine will automatically adjust the Z-axis height of the toolhead during the task to ensure that the focal point falls on the surface of the material, based on the offset of the platform and the input material thickness.
¶ Procedures
- On the touchscreen, select the G-code file in the file list and tap Next to enter the laser job preparation.
- Tap the top-right corner to select the Input Material Thickness Mode.
- Follow the on-screen instructions to adjust the laser height.
The thickness of the Metal Tag is 1.2mm.