To ensure a smooth installation process, this article highlights some important installation tips and precautions that you should be aware of.
¶ Model Files & Installation Videos
¶ Mini Snapmaker Original
-
Click here to download the model files and start printing it.
-
Check out Mini Snapmaker Original Assembly Video to start your installation.
¶ Mini Snapmaker 2.0
-
Click here to download the model files and start printing it.
-
Check out Mini Snapmaker 2.0 Assembly Video to start your installation.
¶ Mini Snapmaker Artisan
-
Click here to download the model files and start printing it.
-
Check out Mini Snapmaker Artisan Assembly Video to start your installation.
¶ Installation Tips & Precautions
- When removing the supports, be careful to differentiate between the supports and the structure of the part itself to avoid damaging the part. If the supports are tiny or difficult to remove, you can use diagonal pliers or utility knives.
Always be careful to avoid hurting yourself.
- When the joints are too tight to assemble, you can gently tap them with a small hammer.
- To make the model stronger, you can apply some glue around the joints.
- When assembling the linear modules, you can apply some lubricating oil between the slider and the steel strip to ensure smooth sliding.
