Should you get injured from sharp objects, follow these first aid steps:
(1) Stop the bleeding. Apply pressure to the wound with a clean cloth for a few minutes until the bleeding stops. If the bleeding won’t stop or other tissues are severely injured, seek medical help immediately.
(2) Remove any dirt and debris. Use sterilized tweezers to remove dirt and debris around the wound. If the debris penetrates deep into your skin, seek medical help immediately.
(3) Clean. Gently rinse the wound, and wipe away the residual water using a clean cloth.
(4) Disinfect. Apply an antiseptic cream on the wound to prevent infection. If the wound is infected, seek medical help immediately.
(5) Band up. Use a bandage to protect the wound from further exposure to dirt and bacteria.
Any injuries to the vulnerable parts, like faces, eyes, and arteries, requires immediate medical treatment.
CNC carving and cutting will produce dust and sawdust, which may irritate your respiratory system. Generally, we recommend you use safety addons and wear protective masks when carving or cutting. Should respiratory irritation occur, immediately expose the victim to fresh air and seek medical help.
Sometimes, CNC carving and cutting may emit a scorched smell, which may irritate your respiratory system. Should respiratory irritation occur, immediately expose the victim to fresh air and seek medical help.