Touching hot surfaces (including the heated nozzle, hot end, heated bed, build plate, and melting filament) could cause skin burns. If you are burnt, take the following measures immediately:
- Get yourself away from the heat source.
- Immediately rinse your burnt area with cool running water.
- Remove any clothing or jewelry near your burnt area.
- Wrap the burnt area with a clean, dry bandage.
- If necessary, use pain relievers or seek medical help immediately.
¶ Inhalation of Fumes and Granules
- Fumes, smoke, or granules that irritate your respiratory system might be generated during 3D printing. Therefore, we recommend using this product with air-purifying devices or in a well-ventilated environment. Wear protective masks if necessary.
- In case of respiratory irritation and other similar symptoms, immediately expose the patient to fresh air and arrange for medical attention in time.
Some soluble filaments might be irritating to the human body. Before exposing yourself to such filaments, always check the safety data sheet (SDS) provided by their manufacturers and take safety precautions.