¶ Before You Start
- Download the latest version of LightBurn from its official website and install it on your computer.
There is a 30-day free trial available for new users of LightBurn.
- Optional: It is necessary to restart the Snapmaker machine when switching from Luban to Lightburn due to the difference in connection protocols between the two software. Restarting the machine allows for the switching of the G-code protocol.
¶ Procedures
- Click Devices in the Laser panel.
- Click Create Manually and select SnapMaker from the list, then click Next.
- Select how your device is connected, name the device, and enter the work area dimensions in accordance with your machine models and whether the quick swap kit is installed or not.
Quick swap kit installed
-
350 models: 320 × 335 mm
-
250 models: 230 × 235 mm
-
Artisan: 400 × 400 mm
Quick swap kit not installed
-
350 models: 320 × 350 mm
-
250 models: 230 × 250 mm
-
A150: 160 × 160 mm
- Select the origin position, then click Finish and OK to complete the device addition.