¶ When & Why
- After each laser task.
- Debris may accumulate on the laser engraving and cutting platform after laser machining. Without cleaning, the accumulated debris may make it hard to stably fasten a material, thus damaging the laser engraving and cutting effect, or even may cause fire during laser engraving and cutting.
¶ Before You Start
To facilitate cleaning, you can disassemble the laser engraving and cutting platform and install it back on the machine after cleaning.
¶ Tools Required
- A bristle brush or a small vacuum cleaner
¶ Procedures
Clean the laser engraving and cutting platform along its gutters.
¶ When & Why
- At least once every week.
- After a period of laser machining, tar may accumulate on the laser engraving and cutting platform. Tar is a flammable substance, and the accumulation of tar may pose a fire hazard. Additionally, tar may clog the exhaust channels on the laser engraving and cutting platform.
¶ Before You Start
To facilitate cleaning, you can disassemble the laser engraving and cutting platform and install it back on the machine after cleaning.
¶ Tools Required
- Dust-free cloth
- Ethyl alcohol
The purity of the ethyl alcohol should be at least 75%. The 99% ethyl alcohol works best.
Do not use organic solvents to avoid damaging the product.
¶ Procedures
-
Dip a suitable amount of alcohol onto the dust-free cloth.
-
Gently wipe away the tar on the laser engraving and cutting platform using the cloth. Allow the alcohol to completely evaporate.
