On the Control panel, you can control the movement of the Linear Modules and Toolheads.
¶ Linear Modules
After connection, you can use the buttons below to control the movement of the X, Y, Z, and B axes. If Luban detects the Laser Module or CNC Module, these buttons can also be used to set the work origin and run boundary.
¶ Toolheads
If Luban detects the 3D Printing Module, Laser Module, or CNC Module, a corresponding control panel of the toolhead will appear.
¶ 3D Printing Module
Appears only when Luban detects the 3D Printing Module. On this panel, you can switch working nozzle, control the nozzle temperature, Heated Bed temperature, turn on/off the LED strips and Exhaust Fan, load/unload filament.
¶ Laser Module
Appears only when Luban detects the Laser Module. On this panel, you can turn on/off the crosshair, turn on the laser power, turn on/off the LED strips and Exhaust Fan.
You can also set B Axis Rotation Angle for 4-axis laser projects in the Control Panel of the Workspace.
¶ CNC Module
Appears only when Luban detects the CNC Module. On this panel, you can control CNC spindle speed.
You can also set B Axis Rotation Angle for 4-axis CNC projects in the Control Panel of the Workspace.