On the Console panel, you can enter commands and press the Enter key to control the machine.
Before sending G-code, please make sure you have connected the machine with Luban.
For the whole list of G-code or M-code references, please refer to XXX (to be added).
- v
- Get number of the current software version.
- Get number of the current software version.
- g
- Get some commonly used G-Commands.
- Get some commonly used G-Commands.
- m
- Get some commonly used M-Commands.
- Get some commonly used M-Commands.
- clear
- Clear the console panel.
- Clear the console panel.