STL 3D View takes effects only in 4-axis CNC projects, even if it appears in 3-axis CNC G-code Generator top toolbar.
STL 3D view in 4-axis G-code generator provides a visual representation of the 3D model from an STL file, enabling you to interact with and inspect the model before processing.
To enable/disable it, on top toolbar, click Enable STL 3D View or Disable STL 3D View.
¶ STL 3D View
You can use the mouse to inspect the model before processing.
¶ Make adjustments
Based on the STL 3D view, you can then adjust the placement face and image density of the model.
-
Placement Face
On Model panel of the right configuration bar, click drop-down list in Orientation, and set the placement orientation of the model based on your preference.
-
Image Density
Input a value to set the resolution of the grayscale image generated by the 3D model.
