Click this part in 3D G-code Generator's interface, Luban will direct you to Select Machine/Material page.
¶ Select Machine
¶ Procedures
- Click top right conner of the interface to enter to Select Material window.
- Click Select Machine to enter Select Machine window, you can select the correct machine type, module type, and switch between different nozzle sizes here.
You can also select machine type/module type by clicking Settings > Machine Settings on the top hidden mennu.
¶ Select Material
¶ Procedures
- Click top right conner of the interface to enter to Select Material window.
- On the Select Machine window, you can assign material for the extruder. For details, please refer to - Assign materials to the extruder.
