¶ Problem Description
-
Printing is not round.
-
When the heat bed (Y-axis) moves back and forth, the heat bed can be seen jumping up and down from the side of the heat bed.
-
Print quality problem.
¶ Possible Causes
- The slider of the X-axis linear module is loose.
- The slider of the Y-axis linear module is loose.
- The slider of the Z-axis linear module is loose.
¶ Solution
Please refer to the following link to complete the repair of the linear module.
https://support.snapmaker.com/hc/en-us/articles/1500000110341-What-should-I-do-when-the-slider-of-the-Linear-Module-comes-loose-