For Touchscreen installed with the firmware of V1.9.0 or later, you can update via Wi-Fi or USB flash drive. For firmware previous to V1.9.0, update only via USB flash drive.
Wi-Fi UpdatingUSB Flash Drive Updating
- Turn on the machine.
- Connect your machine to a Wi-Fi network
- Swipe left on the touchscreen > tap Settings > Firmware Update > Check for Updates > Update Now > Complete.
- Turn off the machine. Wait for 5 seconds, and then restart the machine.
- Download the firmware from Snapmaker 2.0 Firmware Updates and Downloads
- Place the downloaded firmware update file, Snapmaker2_V{version}.bin, onto your USB flash drive.
- Insert the USB flash drive into the controller, and then turn on the machine.
- Swipe left on the touchscreen > tap Files > tap USB > tap the firmware file to update.
- Turn off the machine. Wait for 5 seconds, and then restart the machine.