On the 3D Printing Module
 |
Warns you of the hot surface. Avoid direct contact with the nozzle and hot end during printing or immediately after printing. |
 |
On the Laser Module
|
Warns you of laser radiation. This is a class 4 laser product. Avoid eyes and skin exposure to direct or scattered radiation. Wear the Laser Safety Goggles or use other protective equipment such as the Enclosure during laser engraving and cutting. | |
|
Warns you that laser radiation is emitted from this aperture. Never look into the aperture or put your body parts under the aperture when the laser engraving and cutting machine is powered on. | |
 |
||
On the CNC Module
 |
Warns you of sharp objects. Take care to avoid injury when attaching or detaching the CNC bits. |
 |
On the Heated Bed
 |
Warns you of danger. Pay attention to any operations on the Heated Bed. |
 |
 |
Warns you of the hot surface. Avoid direct contact with the Heated Bed during printing or immediately after printing. Wait several minutes before contact or use auxiliary tools like heat-insulated gloves. | |
 |
Do not print directly on this surface; otherwise, you will damage the Heated Bed. | |
 |
Do not touch the Heated Bed with bare hands during printing or immediately after printing. |
Note: There are no labels on the Heated Bed on Snapmaker 2.0 A150. Nevertheless, you should remain cautious in operation.
On the Print Sheet
 |
Warns you of danger. Pay attention to any operations on the Print Sheet. |
 |
 |
Warns you of the hot surface. Avoid direct contact with the Print Sheet during printing or immediately after printing. Wait several minutes before contact or use auxiliary tools like heat-insulated gloves. | |
 |
Do not touch the Print Sheet with bare hands during printing or immediately after printing. |