Snapmaker 2.0 50W CNC Module supports material including wood, MDF, acrylic sheet, carbon fiber sheet, POM, PCB, more being tested.
The data sheets provided in this manual are intended for reference and comparison purposes only. Actual performance varies with carving / cutting conditions. Each user is responsible for judging the fitness for application in specific conditions. The data is subject to change without notice.
When you use Carving V-Bit in Relief mode, it is recommended to use the parameters below:
When you use Flat End Mill in Vector mode, it is recommended to use the parameters below:
To get more information on the hardness of a specific type of wood, see Wood Database at wood-database.com/wood-filter.