Snapmaker U1: Optimized profiles are built into Snapmaker Orca.
Other printers: Supports most FDM 3D printers, though manual tuning may be required.
Wood PLA is a composite filament made by blending PLA with natural wood fibers. It delivers a realistic wood-like appearance, a premium matte finish, and a natural texture, making it ideal for home décor, artistic creations, display models, and other woodworking-inspired projects.
Compared with standard PLA, Wood PLA offers:
Wood PLA is ideal for printing:
Wood PLA is designed for aesthetic appeal rather than mechanical performance. It is not recommended for:
The following settings are recommended when using a 0.4 mm nozzle:
Actual settings may vary depending on your printer, model geometry, and printing environment.
No. A Top Cover is not required when printing with Wood PLA.
No. A Hardened Steel Hot End is not required for printing with Wood PLA.
However, a 0.2 mm nozzle is not recommended. Because Wood PLA contains natural wood fibers, using a 0.2 mm nozzle or smaller significantly increases the risk of clogging.
For the best printing performance, we recommend using:
Compared with standard PLA, Wood PLA is more prone to nozzle clogging due to its natural wood fibers.
If clogging occurs frequently:
Yes. Its optimized formulation improves extrusion stability while reducing common issues such as clogging and excessive stringing. Under optimized printing conditions, Wood PLA supports print speeds of up to 250 mm/s.
Yes. When used with the Snapmaker U1, the printer automatically recognizes the filament and loads the recommended print settings.
Note: RFID recognition is currently supported only on the Snapmaker U1.
Yes. Because Wood PLA contains natural wood fibers, it is more sensitive to moisture than standard PLA.
Recommended drying settings: 55°C for 8 hours.
Common signs of moisture absorption include:
If you notice any of these symptoms, dry the filament before printing again.
For optimal print quality and long-term performance:
Extended exposure to UV light may cause the filament to yellow over time.
Wood PLA offers heat resistance similar to that of standard PLA. It may begin to soften at around 55°C, so it is not recommended for high-temperature environments or prolonged outdoor use.