No, it is not required.
No, it is not required.
It is recommended to dry Silk PLA before printing, and it is also advisable to keep it continuously dried during printing and storage to ensure stable print quality and avoid issues such as stringing, bubbling, or poor layer adhesion.
For best results, it is recommended to use a filament dryer such as the SnapDryer during both pre-print drying and continuous printing.
| Build Plate | Recommendation |
|---|---|
| U1 Textured PEI Steel Plate | Recommended |
| U1 Smooth PEI Steel Plate | Recommended |
| U1 Graphic Effect Steel Plate | Recommended |
To effectively reduce stringing, you can optimize the following parameters: