PETG Translucent is a semi-transparent PETG filament that combines up to 90% light transmission with PETG's reliable mechanical properties. Compared with PLA, it offers:
It is suitable for both decorative and functional applications, such as lampshades, light diffusers, electronic enclosures, outdoor accessories, and artistic creations.
The following settings are recommended when using a 0.4 mm nozzle:
Actual settings may vary depending on your printer, model geometry, and printing environment.
No. A Top Cover is not required when printing with PETG Translucent.
No. A Hardened Steel Hot End is not required for printing with PETG Translucent.
Under optimized print settings, PETG Translucent can achieve up to 90% light transmittance.
You can also adjust the final appearance by changing the wall loop count:
Please note that FDM 3D printing cannot achieve glass-like transparency, especially for complex geometries.
Yes. Compared with PLA, PETG Translucent provides:
This makes it suitable for both functional and decorative applications.
Yes. PETG Translucent provides excellent:
It is well suited for outdoor applications such as garden accessories, outdoor fixtures, and decorative items exposed to sunlight or rain.
Yes. PETG Translucent is highly sensitive to moisture. Drying the filament before printing helps prevent bubbling during extrusion and ensures the best surface finish, translucency, and overall print quality.
Recommended drying settings:
-Temperature: 65°C
-Duration: 6 hours
To maintain optimal print quality:
For the best experience, we recommend using SnapDryer for both drying and long-term storage.
Common signs include:
If you notice these symptoms, the filament has likely absorbed moisture and should be dried before printing.
Yes. We strongly recommend protecting PETG Translucent from moisture during printing, especially when printing highly translucent models. Printing from a sealed dry box or a sealed container with desiccant helps prevent moisture absorption and ensures the best surface finish and translucency.
To maximize translucency, consider the following settings:
Please note that reducing print speed and layer height will generally increase print time, and achieving glass-like transparency is not possible with FDM 3D printing, especially for complex models.
It depends on your model.
Enable Spiral Vase Mode for continuous extrusion and improved light transmission.
If you want to minimize visible internal infill patterns, set the infill density to 100%.
Please note that 100% infill will significantly increase print time.
If the filament cools too quickly, PETG Translucent may lose layer-to-layer bonding strength.
Try one or more of the following:
These adjustments can improve interlayer bonding and help reduce delamination or splitting.
Several factors affect translucency, including:
Models with fewer wall loops and thinner walls generally achieve higher light transmittance, while thicker or more complex geometries scatter more light, resulting in a less translucent appearance.Your content here